DIGIVIBRO MODEL-1332A
DIGITAL DISPLAY VIBROMETER

  • Extremely small size and light weight offers complete portability in field use.
  • A charge amplifier input is incorporated to enable farpoint vibration measurements,eliminating influences originated in length of input cable.
  • No range selection is needed for acceleration measurement up to 200m/s2 for velocity measurement up to 200mm/s (RMS) and for displacement measurement up to 2mm p-p.
  • A hold-function is provided for digital readout holding which insures easy reading.
  • A commercially-available transistoruse dry battery is used as the power source for complete portability.And the battery alarm system is incorporated for battery check.
  • Piezo Electric Pickup is used as the input transducer for long life operation and wide frequency range of 10 to 5000Hz.
  • Full accessories of a contact pin ,a handler and a magnetic holder are provided as standard for various field use.


COMPONENT DEVICES

1. Digi-vibro Model-1332A 1pc 6. Output Cable

1pc
2. Pickup Model-2304A 1pc 7. Dry battery 006P 1pc
3. Contact pin and handler 1pc 8. Small driver 1pc
4. Low noise cable LNC-3F-1.5 1pc 9. Instruction Manual

1pc
5. Magnetic Holder MG-1 1pc

SPECIFICATIONS

VIBRATION PICKUP: Piezo Electric Pickup Model-2304A
INPUT: BNC connection Charge input
ACCELERATION RANGE: 0 to 199.9m/s2
VELOCITY RANGE: 0 to 199.9mm/s(RMS)
DISPLACEMENT RANGE: 0 to 1.999mm(p-p)
FREQUENCY RANGE: 10Hz to 5000Hz ±5%(Acc:5Hz～)
ACCURACY: Acceleration 3% of Rdg± 1digit
(at 80Hz, half of FS)
STABILITY AGAINST
TEMPERATURE:		 +0.15% of Reg /℃(typ)
AC OUTPUT: Output Resistance 1kΩwith mini-plug
Acceleration ：10mV/(m/s2)±2Vmax
velocity： 10mV/mm/s ±2Vmax
Displacement ：2V/mm ±2Vmax
Noise level ： 1mV rms max
DIGITAL INDICATOR: Liquid Crystal Display 3( 1/2)digit
Sampling rate：approx.3 times/sec.
READOUT HOLDING: During depressing the HOLD button,
the readout can be held.
BATTERY: 006P(9V)1pc
Available voltage 10V to 7.5V
Battery Check alarm at 7V
Continuous use more than 70 hours
AMBIENT TEMPERATURE: -10℃to +50℃
DIMENSIONS&WEIGHT: Dimensions 75(W)×130(H)×24(D)mm
(AMPLIFIER) Weight 250 grams approx.

| JICC  |  Inquiry  |