|
 Film-formed
target mark is very convenient when performing a partial measurement while
locating a target point.
Most
appropriate to control the gloss and reflection density of electronic
devices, metals, precision devices, etc. as well as the reflection density
(OD) and reflective index of printed materials, papers, etc.
| Features |
| 1. |
You can save, store, input and refer to the
measured data, and a printer is very handy which you can grasp by
one hand. |
| 2. |
No warming-up time is required, and you can measure
reflection density and reflective index at the same
time. |
| 3. |
You need not worry about whether or not you have
turned off the power thanks to the energy saving design with
automatic power-off function. |
| 4. |
The accuracy of your instrument can be checked,
using an optional calibration plate for accuracy
control. |
| 5. |
You can use a data-receiving/editing software on
Windows and an optional
printer. |
|
|
| *The
accuracy of this model is traceable to the national
standard of the Japan Color Research Institute(JCRI). |
|
|
D
90mm
,
(A diameter of target mark is 4.5mm
0.01D
(at the sample of 1.0D)